Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

tranny problem.Please help

Thread Tools
 
Search this Thread
 
Old 05-17-2007, 12:07 AM
  #1  
TECH Apprentice
Thread Starter
iTrader: (8)
 
AaronR's Avatar
 
Join Date: May 2005
Posts: 362
Likes: 0
Received 0 Likes on 0 Posts
Default tranny problem.Please help

Ive gone through a couple slaves and a master in a short time but this seems different.Car was feeling a little hard to get into gear.Layed into it a little bit and didnt want to go in any gear after.Put it in 2nd then it was better but hard.After restarting the car leaving the store it went into all the gears ok but feels sloppy,the engagment is different.I would appreciate any help or suggestions.Also clutch is stock on a H/C car but doesnt seem to be slipping.
Old 05-17-2007, 07:55 AM
  #2  
wrencher
iTrader: (2)
 
wrencher's Avatar
 
Join Date: Aug 2002
Location: Chicagoland
Posts: 4,762
Likes: 0
Received 0 Likes on 0 Posts

Default

Sounds like you have hydraulic issues again.
Notchy shifting, inconsistant release points = hydraulics.
Why a couple of slaves & master in a short period of time?
Old 05-17-2007, 09:06 AM
  #3  
TECH Apprentice
Thread Starter
iTrader: (8)
 
AaronR's Avatar
 
Join Date: May 2005
Posts: 362
Likes: 0
Received 0 Likes on 0 Posts
Default

I guess cause there ****.One guy on another forum said his car did the same thing and it was a broken spring in the disc.I have a feeling thats the case.




All times are GMT -5. The time now is 08:13 PM.