Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Grinds in 4th no matter what!!!

Thread Tools
 
Search this Thread
 
Old 07-30-2007, 07:34 PM
  #1  
11 Second Club
Thread Starter
iTrader: (29)
 
blue98Z's Avatar
 
Join Date: May 2006
Location: The Bayou State
Posts: 1,933
Likes: 0
Received 1 Like on 1 Post

Default Grinds in 4th no matter what!!!

Tried the search, but couldn't find anything that fit the problem I'm still having. I adjusted the Ram M/C all the way out cause it was grinding in 4th under hard acceleration and it still grinds in 4th!! The clutch feels good and stiff no matter how I drive it so I'm pretty sure there isn't any air in the lines. The tranny is rebuilt and has about 700-800 miles on it and the Spec 3. I need some suggestions or something cause I can't afford another tranny rebuild and I'm too aggravated to think right now.
Old 07-30-2007, 09:39 PM
  #2  
FormerVendor
iTrader: (37)
 
ls1 joe's Avatar
 
Join Date: Nov 2001
Location: Houston,Tx
Posts: 3,533
Likes: 0
Received 3 Likes on 2 Posts
Default

Try all of my suggestions on telling if it is the clutch or hydraulics. I lean more towards you needing a mcleod adjustable since you are at the end of the adjustment on the ram.

Amber




All times are GMT -5. The time now is 03:11 AM.