Turnin20s

iTrader: (12)

Me and my brother are in the precess of putting a T56 from an Lt1 car into his s10 behind a TBI 350. He got the tranny with no hydrolics and he ordered a new master and slave, but we are having trouble with the braided line that connects the two. If someone has a part # please let me know, or a good one laying around, I'd be interested in that too.

Thanks alot

DONAIMIAN

iTrader: (18)

There isnt one. You have two options.
1. buy a new master
2. buy the fittings so you can use -4an lines (fittings are ~45each and you need 2)

Turnin20s

iTrader: (12)

He ordered a new master, but I don't think it comes with the hose, guess we'll have to see tomorrow when it gets here

Omec

iTrader: (2)

where did he order the master from? they normaly come w/ the hose. if it doesnt, pm me. i know a guy that sells them.

Turnin20s

iTrader: (12)

He got it from autozone, where he works, so he got a good deal but the master was $100 so I would think it comes with a hose

Ox65

I'm going to need to find a hose to for my swap. Let me know if it comes with that master and what P/N it is. Thanks Ed,