2 way momentary switch for cutout
#1
TECH Fanatic
Thread Starter
Join Date: Apr 2008
Location: Shillington PA
Posts: 1,775
Likes: 0
Received 0 Likes
on
0 Posts
2 way momentary switch for cutout
Ok, so I have a dmh cutout, and it hasn't worked in about 6 months... I sent it back thinking it was the motor, the refurbished it, sent it back, and it still only works one way... this makes me believe that the switch that came with it was bad. Sooo where the hell do I buy a 2 way momentary switch from? I've checked radio shack and didn't find anything, they were all just on/off toggles. I don't want to send it back to dmh because they were real nice and fixed the motor that wasn't even broken, and there's no need to send a $2 switch back when I can fix that myself. I'd rather not order off line because I'd like to go to the track this thursday and I'd like to have the cutout working by then
#4
TECH Fanatic
Thread Starter
Join Date: Apr 2008
Location: Shillington PA
Posts: 1,775
Likes: 0
Received 0 Likes
on
0 Posts
I may check that out. I don't want to order another from dmh because its a cheap switch. I want a little bit heavier duty one so I don't have to replace it again.
#5
11 Second Club
iTrader: (7)
Join Date: May 2008
Location: Saline,MI
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
Try Mcmaster-carr, They are a mail order anything place.
Here is there website: http://www.mcmaster.com/
Also try Mouser, they are a big electronics store.
Here is there website: http://www.mouser.com/
Here is there website: http://www.mcmaster.com/
Also try Mouser, they are a big electronics store.
Here is there website: http://www.mouser.com/