head and cam on 98 trans am
#1
Teching In
Thread Starter
Join Date: Feb 2008
Location: Tacoma Washington
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
head and cam on 98 trans am
I have a 98 trans am with slp loudmouth1, bassani y pipe, bbk shorties, bbk 85mm TB, SLP Lid and mass air flow sensor, ls6 intake manifold, and 3.73's. Im looking for a good head and cam package that is good on the street. Im looking at getting ls6 2.5 heads from tsp and the torquer v3 cam. Along with that ill be getting a ls6 ported oil pump a ls2 timing chain, and a 3300 stall. Is this a good setup for my trans am? Im open to any sugestions. Thanks!!!
#3
FormerVendor
iTrader: (18)
I think it's a good combo as well but the BBK headers will be fairly restrictive on that aggressive of a combo. We would probably do a little smaller custom grind if you are looking to keep them or if you want to go to a LT header pretty quick you can get by with this combo until you get them. You just won't see the full potential of what this heads/cam combo will produce.
Jon
Jon
#4
Teching In
Thread Starter
Join Date: Feb 2008
Location: Tacoma Washington
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
I think it's a good combo as well but the BBK headers will be fairly restrictive on that aggressive of a combo. We would probably do a little smaller custom grind if you are looking to keep them or if you want to go to a LT header pretty quick you can get by with this combo until you get them. You just won't see the full potential of what this heads/cam combo will produce.
Jon
Jon
I talked to just a couple of days ago. I called you from afghanastan. I will be talking to you in person before to long. I leave this country in a few days and should be in amarillo in a month or so. I really want this set up. So ill probably have you throw on a set of longtubes when i get the rest of this stuff on. Thanks for the advice.....If you can think of anything else I would appriciate it. Thanks!!!!! Noel
#5
Teching In
Thread Starter
Join Date: Feb 2008
Location: Tacoma Washington
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the advice. I bought those shorties before I even thought about doing head and cam package. Im going to get some longtubes at the time of the install. What kind of rear wheel hp do you think i would be looking at? Thanks!!