2005 6.0 truck harness,HELP!!!
02-17-2007, 10:49 AM
#1
Teching In
Thread Starter
Join Date: Sep 2005
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
2005 6.0 truck harness,HELP!!! I am putting a 2005 6.0 out of a silverado in my 52 chevy truck,Can anyone direct me to a place or give me some info on using the stock harness? I I would like to know what to keep and what to get rid of. I already have an 1998 ls1 in my 54 chev belair and it rocks so I thought the truck should get one too! Thanks for any help. RABBOTT
02-18-2007, 09:15 AM
#2
when I use stock harness I start by completely stripping the harness apart, de-pin the ECM and start from scratch pretty much. You can make it pretty simple if you want.
I am currently work on a harness for a 5.3L 4L60E in my 67 pickup. Stock PCM located under the dash. I am modifying the harness to go through the fire wall behind the intake for a very clean look. I'll have some picture soon and schematics on it.
visit my website in my signature, and email me with some more specific questions. I can help you out from wiring schematics to reprogramming your pcm.
I am currently work on a harness for a 5.3L 4L60E in my 67 pickup. Stock PCM located under the dash. I am modifying the harness to go through the fire wall behind the intake for a very clean look. I'll have some picture soon and schematics on it.
visit my website in my signature, and email me with some more specific questions. I can help you out from wiring schematics to reprogramming your pcm.
Last edited by busta9876; 02-18-2007 at 09:36 AM.
