heads and cam
02-21-2007, 04:05 PM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Feb 2007
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
heads and cam new to ls1 have a 2002 Z28 auto 3800 stall long tube headers lid k&nfilter 323 gears looking to do heads and cam on budget $2500 to spend car is driven 5000 miles ayear track 8times ayear best so far 12:40 at 108 1/4 mile looking to go low 11s your thoughts thanks
02-22-2007, 02:44 AM
#2
TECH Addict
Check out Texas Speed & Performance, they offer some of the best bang per buck setups and have a great reputation.
I'd take a look at their Troquer V3 or MS4 cam and combine it with either their PRC CNC heads or their terminator heads, don't be afraid of flycutting either.
I'd take a look at their Troquer V3 or MS4 cam and combine it with either their PRC CNC heads or their terminator heads, don't be afraid of flycutting either.
02-22-2007, 08:55 PM
#4
CALL TEXAS SPEED!!!!!!!!
Here's some info I use their MS4 and put down 417 with bolt ons.... Here's a link to a GMHTP page about the Ms4 and heads....also here's a screen shot of the head and cam package from TSP.... and, and, and, and, and there's a screen shot with all the info on the 5.3l heads.....MS4 info
http://www.gmhightechperformance.com...ls1_dyno_tech/
Here's some info I use their MS4 and put down 417 with bolt ons.... Here's a link to a GMHTP page about the Ms4 and heads....also here's a screen shot of the head and cam package from TSP.... and, and, and, and, and there's a screen shot with all the info on the 5.3l heads.....MS4 info
http://www.gmhightechperformance.com...ls1_dyno_tech/
