JPs98z28

I'm new to nitrous and suck at electrical. prob. is the noids are not getting power. i would like to know what are some good grounds for the noids the arming switch and pin 85. also were is a good place for ignition switched 12volt. Thanks

strokedls1

iTrader: (1)

I ran a ground to a screw by the fuse box on the radiator support. The 12 volt I got off the radio constant power wire.

JPs98z28

thanks i'll try that

Black02SS

iTrader: (36)

I grounded my solenoids to the ground post on the passenger side of the car. In reference to the other 2 grounds, just do the above method and make sure it is a good ground.