Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

ken bell booster pump 150shot

Thread Tools
 
Search this Thread
 
Old 11-28-2011, 05:28 PM
  #1  
On The Tree
Thread Starter
 
blow thru's Avatar
 
Join Date: Aug 2009
Posts: 104
Likes: 0
Received 0 Likes on 0 Posts
Default ken bell booster pump 150shot

Im currently running bolt ons only and about to get a tune and wanting to spray 125-150 and wanting be safe not maxing out the standard pump. I only plan on spraying a couple of times a month so could i just get away with a bap. Thanks
Old 12-02-2011, 02:35 PM
  #2  
On The Tree
Thread Starter
 
blow thru's Avatar
 
Join Date: Aug 2009
Posts: 104
Likes: 0
Received 0 Likes on 0 Posts
Default

Anyones thoughts on a bap?ive done some searching and still unsure how this will effect my pump in reliability.It saves me dropping the tank to do the 255
Old 12-02-2011, 04:07 PM
  #3  
On The Tree
iTrader: (1)
 
ducatisl's Avatar
 
Join Date: May 2010
Location: Fort Walton Beach, FL
Posts: 131
Likes: 0
Received 0 Likes on 0 Posts
Default

Okay, I'll jump in: You should figure out how much total rwhp you're going to put down. Subtract your all motor rwhp and what you're left with is how much you theoretically can spray. Datalog your AFR and rail pressure and make sure the AFR stays reasonable and the rail pressure doesn't drop significantly.

This is why people use standalone fuel systems.
Old 12-02-2011, 05:27 PM
  #4  
FormerVendor
 
Sales1@Texas-speed's Avatar
 
Join Date: Jun 2011
Posts: 890
Likes: 0
Received 3 Likes on 3 Posts
Default

I would recommend just upgrading the factory pump with a kit from Racetronix which will supply more than enough fuel to handle the mods you have.




All times are GMT -5. The time now is 08:31 AM.