Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

H/C cars on the bottle?

Thread Tools
 
Search this Thread
 
Old 08-06-2002, 04:05 AM
  #1  
9 Second Club
Thread Starter
iTrader: (5)
 
badass 2002 z28's Avatar
 
Join Date: Nov 2001
Location: St. Louis, MO
Posts: 1,300
Likes: 0
Received 0 Likes on 0 Posts
Default H/C cars on the bottle?

how many are running around and what size shot are u running? any H/C cars spraying with the stock fuel system? if so what ET's you neting NA vs on the bottle? thanks
Old 08-06-2002, 07:09 AM
  #2  
TECH Fanatic
 
2000 Camaro SS's Avatar
 
Join Date: Nov 2001
Location: Iowa :-/~
Posts: 1,705
Likes: 0
Received 0 Likes on 0 Posts
Default Re: H/C cars on the bottle?

I have been shooting 100 wet shot but I have had problems. Bent a torque arm and broke a u-joint, and my slicks where rubbing the fender and wheel well, but now I'm getting that fixed. Stock H&C I did 12.4 @ 111 but that was with a bent valve & 8 bent push rods. (I did not find all that stuff until I did my heads) The last time out I did 11.9 @ 121 with all the rubbing & bent TA. As you can see I gained 10 miles per hour and almost 1/2 sec. BUT these are not good numbers to judge by because of all of the problems. I just install a inline fuel pump and the next time out I will be shooting 150 wet off the line. It will be about 10 to 14 days until I get the new torque arm. The car is aimed at nitrous with the cam I used. It is not the best for NA runs but better fo nitrous runs.

Cam info: Port & Polished Heads, Ferrea Comp + Valves, Lunati 221/224 .558 .560@114, CC 941




All times are GMT -5. The time now is 08:08 PM.