z0qwik

iTrader: (2)

Hey, got a plate kit installed on my car a couple months back and finally got to the track Sunday and sprayed it for the 1st time and I was not really impressed. Here is the times.

Motor

60ft-1.98
330-5.08
861/8-7.67
1/8 mph-96.32
1/4-11.76
1/4 mph-120.06

Spray

60ft-1.86
330-5.03
1/8-7.54
1/8 mph-100.31
1/4-11.48
1/4 mph-125.42

Its a 102 plate kit with a dry 100shot. I only picked up about 4-5mph as you can see and maybe .2-.3 et. Seems a little off to me. The car made about 550/570rwhp on the 100 shot and only to trap 125 is off but that just my opinion. Im all ears to hear what everyone thinks since im new to nitrous.

brandon@nitrousoutlet

iTrader: (2)

What happened between the 60 ft and 330?What was your bottle pressure on the nitrous pass? You picked up a 10th on your 60' but 330' about the same. If i were you I would be focused on getting the car to 60' better to see bigger gains.

z0qwik

iTrader: (2)

Im not quite sure what happened between the 60 and 330 honestly. The bottle pressure on all the nitrous runs was about 950-1000psi on the gauge. Bottle was completely filled. I hear you on the 60ft to see better times, still a lot to be gained there. I just thought I would of seen a bigger mph gain spraying compared to being all motor but I'm new to this nitrous as said so if everyone thinks this is about right then that's cool and I'll get the 60ft down.

brandon@nitrousoutlet

iTrader: (2)

Have you checked your A/F? read the plugs? How much timing are you running and how much are you taking out?

z0qwik

iTrader: (2)

Sent some info over to you. Sorry for the slow response.

oakley6575

iTrader: (3)

Would like to know this as well

swoop

iTrader: (1)

I picked up about a second and 10 mph on a 100 wet shot. Car usually runs 12.30's on motor mid 1.70's 60 ft. On spray ran 11.36 with a 1.63 60 ft.