Best piston ring for nitrous?
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: Mar 2008
Location: Bardstown,Ky
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Best piston ring for nitrous?
Looked all over sites read different stuff. What's the best ring to go with? Not looking to spray all the time but I want it to hold up when I do spray
#2
TECH Veteran
iTrader: (11)
How much spray?
If you're going to spray alot, the kind piston is going to matter a little more compared to what the ring is made of.
A piston with the ring down further in the bore with more meat on the ringlands to me is more of an issue. Plus having a good compression height
A good ring on a not-so-good of a piston choice is a worse situation than a mediocre ring on a good piston.
If you're going to spray alot, the kind piston is going to matter a little more compared to what the ring is made of.
A piston with the ring down further in the bore with more meat on the ringlands to me is more of an issue. Plus having a good compression height
A good ring on a not-so-good of a piston choice is a worse situation than a mediocre ring on a good piston.
#6
Teching In
Thread Starter
iTrader: (3)
Join Date: Mar 2008
Location: Bardstown,Ky
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Building a 6.0 with diamond dome pistons (forged) spraying 150-200 shot. It's not gonna spray all the time everyday. But if I want a good track pass or to drag someone down the street I don't want the ring to be tore up