bstrang6

I recently started installing the hardware for my plate kit, and have ran into one snag. After spacing the TB out with the plate, the Cruise Control line is too short and holds the tb open. I disconnected it and the throttle cable had enough slack to not effect it, and operate normally, but I really want to regain my cruise control. Any way to adjust or replace the cruise cable?

n20transam

iTrader: (5)

Did your kit come with a adapter to move the bracket forward? I just put the n20 outlet plate kit on mine and had to use the supplied adapter to make it right.

NitrousExpress

iTrader: (4)

If it's one of our systems there should have been a TB relocation bracket that came with it.

Bracket looks like this




-Chris

bstrang6

It was a used kit with a Nitrous Outlet plate. I called them up and they are shipping me an adaptor, I'll report back. Thanks guys!

n20transam

iTrader: (5)

How thick is that plate? I felt like I was going to strip the one I have just snugging them up. Yours looks a little beefier.

NitrousExpress

iTrader: (4)

-Chris

n20transam

iTrader: (5)

Wow, you are on it. Thanks, I appreciate it. I'm going to check mine tonight