Dimpled front bumper
#1
9 Second Club
Thread Starter
iTrader: (3)
Join Date: Sep 2010
Location: Mesa, AZ
Posts: 411
Likes: 0
Received 0 Likes
on
0 Posts
Dimpled front bumper
My car is dimpled on both the driver and passenger sides where the bumper meets the front fenders right at the corner of the turn signal openings and the headlight areas on both sides have waves where they should be flat. I jacked the car up and removed the doors where you access the fog lights but I didn't see anything bent, broken or missing from the areas damaged. The damage is worse on the passenger side. I don't want to put a new bumper cover on and have it do the same thing again. Has anyone had this problem? Could it be cause by the front bumper support sagging?
#3
9 Second Club
Thread Starter
iTrader: (3)
Join Date: Sep 2010
Location: Mesa, AZ
Posts: 411
Likes: 0
Received 0 Likes
on
0 Posts
Idk I haven't taken it off yet. But my guess is it's been this way for at least a couple yrs so I doubt it will just pop back into place. I'm getting new front fenders because the previous owner jacked the car up on the pinch welds behind the front tires it bend and broke the fenders there.
Last edited by RobsZ28; 03-31-2012 at 04:44 PM.