FEELER! T56 conversion for built auto
#1
FEELER! T56 conversion for built auto
Category: Drivetrain
Price: $1
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): NY
Item Condition: Used
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
T56 trans = 65k
Monster level 4 = 6k mile
Tick master = 100 miles
PRO 5.0 w/ short stick
crossmember
Console
Im looking for a built 4l60, 4l80, etc with a 4k stall converter
Any questions just ask
#4
wtt built auto 4l65e
How's it going,
I have a built auto
Trutech (level 4 equivelence)
AC delco 5 pinion planetarys front and rear
Sonnax Smart Shell
Raybestos blue frictions 3/4 (z-pak)
Alto low reverse frictions/ koleen steels
Sonnax oversize billet overdrive and 2nd servos
New reverse input drum with carbon hp wide band.
Sonnax reinforcement ring
Sonnax 3-2 check valve
Hd seperator plate
New electronics
.490 boost valve
Trutech shift calibration kit
Revmax stage 3 3600 stall
Everything is brand new auto, and stall.
I can also trade you my auto pedals, shifter cable, nuetral safety, very nice shifter hole cover ( I was converting my m6 to auto, but I need a th200 for nhra racing), so you won't need to make your own and mine you just use pop rivets or you can through bolt the panels.
I will also throw in 10 qts unopened dex merc VI valvoline synthetic trans fluid
10x20 trans cooler brand new flex-a-lite.
Or Auto trans Radiator and new metal oem transmission lines.
I have 3,000.00 in this setup
Let me know if your interested I can send pics.
I have a built auto
Trutech (level 4 equivelence)
AC delco 5 pinion planetarys front and rear
Sonnax Smart Shell
Raybestos blue frictions 3/4 (z-pak)
Alto low reverse frictions/ koleen steels
Sonnax oversize billet overdrive and 2nd servos
New reverse input drum with carbon hp wide band.
Sonnax reinforcement ring
Sonnax 3-2 check valve
Hd seperator plate
New electronics
.490 boost valve
Trutech shift calibration kit
Revmax stage 3 3600 stall
Everything is brand new auto, and stall.
I can also trade you my auto pedals, shifter cable, nuetral safety, very nice shifter hole cover ( I was converting my m6 to auto, but I need a th200 for nhra racing), so you won't need to make your own and mine you just use pop rivets or you can through bolt the panels.
I will also throw in 10 qts unopened dex merc VI valvoline synthetic trans fluid
10x20 trans cooler brand new flex-a-lite.
Or Auto trans Radiator and new metal oem transmission lines.
I have 3,000.00 in this setup
Let me know if your interested I can send pics.