LE LT1 Custom Cam with valve springs/retainers
04-06-2013, 05:37 PM
#1
LE LT1 Custom Cam with valve springs/retainers I am selling my current custom LE cam, the specs are 226/226 @.050 and .565/.565" lift 110 LSA. It is very similar to the LE 226/232 .578/.574 110 LSA. – 1900-6200 RPM cam but with smaller exhaust duration to build slightly more compression than the other cam.
$150 for the cam
I'm also selling my current valve springs. Unsure of the brand as they came with my EB Porting heads, however I did have them spec'd out by the machine shop to the following specs:
Double Springs
Closed: 140# @ 1.800"
Open: 380# @ 1.200" (@.600" lift)
Coil Bind: 1.130"
These also come with the spring retainers and locks.
$100 for the springs, retainers, locks.
Purchase both together for $200 + Shipping.
$150 for the cam
I'm also selling my current valve springs. Unsure of the brand as they came with my EB Porting heads, however I did have them spec'd out by the machine shop to the following specs:
Double Springs
Closed: 140# @ 1.800"
Open: 380# @ 1.200" (@.600" lift)
Coil Bind: 1.130"
These also come with the spring retainers and locks.
$100 for the springs, retainers, locks.
Purchase both together for $200 + Shipping.
