Performance Parts FS: Kmember, Manual Rack, Torque Arm, Wheels, Clutch, WS6 box, etc.
11-29-2014, 08:19 PM
#1
On The Tree
Thread Starter
iTrader: (44)
Join Date: May 2004
Location: Tuscaloosa AL
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Performance Parts FS: Kmember, Manual Rack, Torque Arm, Wheels, Clutch, WS6 box, etc. Category: Drivetrain
Price: $1
Location (State): AL
Item Condition: Used
LS Engine?: Fits LS Engine
Not having much luck with local sales so willing to ship. Will negotiate pricing with buyer.
Most of this stuff is bulky / heavy so I prefer not to ship. I do travel around the southeast some for work so maybe that's an option. All that being said obviously prices do not include shipping.
I am looking for a set of 295/45/17 MT drag radials or a BMR XSB001 Anti-Roll Bar kit if anybody has these to offer in trade.
Black Tubular K Member with MadMan Manual Steering Rack. - SOLD!
Pretty sure Kmember is BMR but can't remember. Less than 2,000 miles. Kmember has been modified for Madman rack. Does require your spindles to be reamed to 5/8" to accept new tie rods. I have a set I'll throw in if you need them. Nothing wrong with it I just went back to PS set-up. I REALLY don't want to ship this so local is preferred.
Sphon Chassis Mounted Adjustable Torque Arm with Drive shaft Loop. - SOLD!
Less than 1,000 miles on this. Just swapped to one without the slide. Really can't tell much difference between the two though.....
Textralia ExoSkel Twin Disc Clutch Assembly - SOLD!.
This dual disc set up is as near new as you will find. Less than 1,000 miles behind a bolt-on ONLY engine so not hurt at all. Forget exact rating but I think it was around 1,000 ft lbs of torque. I would guess 800+ HP. With a mildly modified T-56 this thing shifted awesome and extremely fast. Uses stock hydraulics. I wouldn't want to drive this everyday in stop and go traffic but it is a good streetable clutch that will hold whatever 90% of you will throw at it. . Pedal pressure is more than stock but very manageable. It is also serviceable if the need arises.
(4) Chrome C5 Z06 Wheels & Tires 18x9.5 &18x10.5 - $650
Front has a set of 275/35/18 Pilots with good tread left. The rears have a set of Nitto drag radials that are completely slick. No thread hanging out but its not far.
(4) Weld Draglite Wheels & Tires Drag Pack 15x8 & 15x3.5 - $700
165R 15 radials on front with plenty of tread. As for the rears I actually have two sets to choose from. Either 275/60/15 BFGoodrich Drag Radials with 3/32 tread. Or Mickey Thompson 28x9 slicks with 4/32 left. Multi-Lug pattern fits 4-1/2 or 4-3/4 for either small chevy or ford.
(2) Weld Draglites Wheels & Tires REAR only 15x8 - $350
Comes with your choice of either 275/60/15 BFGoodrich Drag Radials with 3/32 tread. Or Mickey Thompson 28x9 slicks with 4/32 left. Multi-Lug pattern fits 4-1/2 or 4-3/4 for either small chevy or ford
WS6 Ram Air Air Cleaner box / radiator support - $125
This is the lower air box with the larger opening for your ram air hood. Has been CLEANLY notched for larger air couplings used on my 102mm TB. The notch is not noticeable once the air lid and all couplers are attached.
Factory metal gas / fuel tank from a 98 model. - $200
This would be perfect for installing a sump type fuel system. That is why I have kept it but no longer need it. Has been stored indoors since removal from the car. Factory pump assembly still intact.
Last edited by pewter01z; 12-17-2014 at 06:20 PM. Reason: Item Sold
