D1SC ProCharger for lt1 g body
02-09-2015, 11:35 PM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Oct 2012
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
D1SC ProCharger for lt1 g body D1SC ProCharger:
Currently installed in my 85 monte carlo ss with lt1 engine.
25k miles. I just changed the oil while I had it out. For the d1sc, custom g body bracket with tensioner, mounting hardware and spacers, 12 rib pulley kit (7.65" and 8.5" crank pulley, 3.75" blower pulley, belts for both setups) fluidamper (single keyway but drilled for dual roll pins) with crank spacer matched for kit.
Offering intercooler and piping that was on my g-body, aluminum intake elbow, vortech mondo bov, 60# Siemens Deka injectors, 58mm throttle body, Aeromotive FPR, walbro 400lph in tank fuel pump, a set of new Ngk br7ef (tapered seat, non projected tip) plugs along with the above kit for 3600 shipped.
Currently installed in my 85 monte carlo ss with lt1 engine.
25k miles. I just changed the oil while I had it out. For the d1sc, custom g body bracket with tensioner, mounting hardware and spacers, 12 rib pulley kit (7.65" and 8.5" crank pulley, 3.75" blower pulley, belts for both setups) fluidamper (single keyway but drilled for dual roll pins) with crank spacer matched for kit.
Offering intercooler and piping that was on my g-body, aluminum intake elbow, vortech mondo bov, 60# Siemens Deka injectors, 58mm throttle body, Aeromotive FPR, walbro 400lph in tank fuel pump, a set of new Ngk br7ef (tapered seat, non projected tip) plugs along with the above kit for 3600 shipped.
