gccasper04

iTrader: (4)

Category: Accessories
Price: $650
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): TX
Item Condition: Brand New
LS Engine?: Fits LS Engine

i have an unopened box from alky control. I no longer want the kit as im going in a different direction.

The following is copied straight off their ebay store.

Alkycontrol Methanol Injection kit for the 4th gen F-body. 1993-2002. This is the best kit on the market for the 4th gen F-body. Plenty of reading and feedback at www.corvetteforum.com, www.ls1tech.com, and www.turbobuick.com. Features Custom made hoses, fittings, wiring, instructions etc.

Modified Pump 250+ PSI on M15 and water with cover to prevent any water from intruding into pump

Progressive controller preset for the LS based platform.

Can use 100% methanol and/or any mix thereof with water.

GM Delco 2 bar MAP sensor with regulator to read boost and supply signal to controller. Same sensor can be utilized for SD conversions.

3 teflon lined braided hoses with pressed on ends custom length. Hose feature AN fittings. Meaning a wrench is needed to install and secure hoses. No push-in deal.

Includes a modified OEM factory reservoir which features a bulkhead fitting, low level float switch, custom breather cap, and custom tank plug.

Pre-taped pump fittings

90 micron in-line filter

M15 15 GPH Nozzle

All wiring is weather pack, split loom tubing, cable ties, connectors, heat shrink tubing, solder, etc is included with the kit.

Not to be confused with a generic kit. Will not fit any other application without major modifications. If you need a vehicle specific kit, please contact us. Instructions, tip sheets, and tech support is included. 1000's of this kit have been sold.

Will support 650 RWHP on a single. Twin nozzle upgrades available to increase delivery and support. over 1k RWHP has been made on pump gas 93 and this kit running straight methanol with an LS based motor.