TEA LSA Heads, Comp, Magnuson, Procharer, Nitrous..etc..GARAGE SALE!!!!
04-11-2015, 08:42 AM
#1
Teching In
Thread Starter
iTrader: (10)
Join Date: May 2007
Location: Pikeville, KY
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
TEA LSA Heads, Comp, Magnuson, Procharer, Nitrous..etc..GARAGE SALE!!!! Category: Accessories
Price: $123456
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird, Front wheel drive vehicles
Location (State): KY
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6, LT1/LT4, Small Block, Big Block
LS Engine?: Fits LS Engine
TOTAL ENGINE AIRFLOW Ported LSA Heads with Valves!
GM L92/LS3 CNC Ported Cylinder Heads 2.0
PN: TEA-GML922-CUSTOM
Big Bore GM LS Engines Stage 2 Porting
Our stage 2 program takes our stage 1 port design to the next level and also adds a new redesigned fully cnc-machined combustion chamber. We take the already good factory heads and incorporate our
CNC port program and custom 5 angle valve job to make a very good factory head perform great. We also include our dual .650" lift spring with titanium retainers for outstanding reliability and performance with most any cams and mill to chambers to fit customer's application.
Package includes-
Full CNC ported 287cc intake and 95cc exhaust ports
Custom 5 angle valve job
Hand finishing of Valve job into Porting
Flow test with included sheet
Standard 72cc CNC Chamber
Blueprint ground intake and exhaust valves with necessary backcuts
Deck surface finished with CBN cutter for ultimate surface finish
Blueprint assembly in which all spring heights and pressures are checked
Head will fit 4.00" bore but will require 4.125" gasket.
These heads have around 1k miles on them, within the first 200 miles they were slightly damaged. Since then they have been fully repaired by TEA along with major port work, and valve work! They have ZERO MILES on them since the work!!!! Exhaust Valves are from Lingenfelter and the Intake Valves are Ferrea from TEA.
I am asking $1,500.00 shipped for everything! This includes the heads, intake and exhaust valves, and flow charts from TEA. $1,430.00 in just the port work!!!
WISECO K0004X130 Piston Kit 4.130" Brand New!
Manufacturer's Part Number:K0004X130
Part Type: Piston and Ring Kits
Product Line:Wiseco Professional Series Piston
Bore (in):4.130 in.
Bore (mm):104.902mm
Piston Style:Flat top, with two valve reliefs
Piston Material:Forged aluminum
Compression Distance (in):1.110 in.
Piston Head Volume (cc):+2.50cc
Wrist Pin Style: Press-fit or floating
Pin Diameter (in):0.925 in.
Gapless:No
File Fit:No
Top Ring Thickness:1.2mm
Top Ring Material:Steel
Top Ring Facing Material:Gas nitrided
Second Ring Thickness:1.2mm
Second Ring Material:Cast iron
Second Ring Facing Material: Phosphate coated
Oil Ring Thickness:3.0mm
Oil Ring Material:Chrome plated carbon steel
Oil Ring Tension:Standard
Wiseco pulled out all of the stops when designing these professional series piston kits. These pistons are designed to accommodate the reluctor ring on stroker cranks without having to notch the pin bosses. Offset pins like OE and skirt shapes are specifically designed for street applications, making these the best piston kits available. They have been successfully tested in the highest horsepower applications. Wiseco's professional series piston kits also utilize ArmorGlide skirt coating. ArmorGlide is the result of testing, development, and benchmarking through Wiseco's in-house dyno program. The outcome is minimized friction, maximized horsepower, and improved wear resistance. Not only is ArmorGlide a high-tech lubricant that reduces friction, but it also allows the piston to be fitted tighter within the bore than a non-coated piston. A better ring seal reduces noise from the piston rock and offers better performance.
These are for STOCK RODS!
This Wiseco Piston kit is BRAND NEW in the box.
They normally retail for $830 PLUS shipping...
I am asking $740.00 Shipped! If you have any questions, please feel free to ask! Thanks
dumdum
WISECO PISTON KIT K398X7 4.070
Part Type: Piston and Ring Kits
Product Line:Wiseco Professional Series Piston Kits
Bore (in):4.070 in.
Bore (mm):103.378mm
Piston Style:Flat top, with two valve reliefs
Piston Material:Forged aluminum
Compression Distance (in):1.304 in.
Piston Head Volume (cc):+3.20cc
Wrist Pin Style: Press-fit or floating
Pin Diameter (in):0.927 in.
Gapless:No
File Fit:Yes
Top Ring Thickness:1.2mm
Top Ring Material:Steel
Top Ring Facing Material:Gas nitrided
Second Ring Thickness:1.2mm
Second Ring Material:Cast iron
Second Ring Facing Material: Phosphate coated
Oil Ring Thickness:3.0mm
Oil Ring Material:Chrome plated carbon steel
Oil Ring Tension:Standard
These Pistons ave roughly 500 miles on them. They were removed due to I changed direction in the build.
I am asking $500.00 SHIPPED!
Magnuson ONE to ONE COG Set
Model: MAG-1-1-COG
1:1 COG pulley set for Magnuson Superchargers TVS1900 and TVS2300. Note this will fit the “jack shaft” Style systems ONLY. Looking for the awsome sound of the COG drive without the increased BOOST? This is what you need!!!
Parts included:
(1) 30mm 30 tooth pulley with sheeves
(1) 30mm 30 tooth pulley
(1) COG Belt
(7) M6 Bolts (Missing 1 bolt)
* NOTE: If you are ordering this for a Gen5 Camaro you will need to purchase the clearanced fuel rail in our other auctions. Please make sure these will fit your application.
This Cog Setup has 10,000 miles on it, replaced due to installing the overdrive setup.
I am asking $250.00 shipped!
Magnuson TVS2300 Stock Snout. This was used for 10,000 miles, removed due to ordering the Maggie Max Kit.
I am asking $100.00
ProCharger Mounting Bracket Assembly for 1998-2000 GM Camaro/Trans Am with 5.7L
Model: PC-3GJBB-002
Manufactured by: ProCharger
This item is BRAND NEW in the original packaging!
I am asking $300.00 SHIPPED!
COMP Cams 54-444-11
Manufacturer's Part Number:54-444-11
Part Type:Camshafts
Product Line:COMP Cams XFI XE-R Camshafts
UPC:036584068464
Cam Style:Hydraulic roller tappet
Basic Operating RPM Range:2,000-7,000
Intake Duration at 050 inch Lift:224
Exhaust Duration at 050 inch Lift:230
Duration at 050 inch Lift:224 int./230 exh.
Advertised Intake Duration:273
Advertised Exhaust Duration:279
Advertised Duration:273 int./279 exh.
Intake Valve Lift with Factory Rocker Arm Ratio:0.581 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio:0.588 in.
Valve Lift with Factory Rocker Arm Ratio:0.581 int./0.588 exh.
Lobe Separation (degrees):114
Camshaft Gear Attachment:3-bolt
Computer-Controlled Compatible:Yes
Grind Number:XER273HR
Valve Springs Required:Yes
This Comp Cams 54-444-11 has 1,700 miles on it. Removed due to selling the car.
I am asking $250.00 shipped!
Comp Cams Custom ground 54-000-11 BRAND NEW IN THE BOX!
(see pictures for durations)
I am asking $375.00 shipped!
GM LS7 Cam Stock with 40k miles on it. Removed due to upgrading to a blower cam.
I have TWO of these LS7 Cams with realitvely the same mileage
I am asking $75.00 shipped for each!
JP Performance double-roller billet timing-chain set is perfect for all LS-Series engine components. All JP Performance Timing Chain Sets are supplied with inductioned hardened and multiple keyway crank sprockets (which have the keyways index marked for easier timing, balanced camshaft sprockets, torrington bearing, and a true roller timing chain.
Part# JP5615T
This JP Performance Timing Chain Set is BRAND NEW in the box.
I am asking $80.00
NITROUS OUTLET DRY UNIVERSAL SYSTEM
Dry Nitrous System. Dry nitrous systems inject nitrous only and rely on additional fuel to be added through the injectors using engine management software.
Universal. Since this system does not require a fuel supply it is possible to install this system on just about any motor/vehicle.
Max Flow 500HP Out of this box this system includes a -4AN main feed line that limits flow to 250HP, with a -6AN main feed line this system can flow 500HP. Call us if you are interested in upgrading main feed line size.
Complete System. This system includes everything needed for installation including a 1/16 dry nozzle, nozzle adapter, .122 nitrous solenoid, hardware, wiring, wide open throttle switch, solenoid bracket, main feed line, bottle brackets, and your choice of 10lb, 15lb or no nitrous bottle.
This Nitrous Outlet kit is brand new in the original packaging! It retails for $459.00, I am asking $400.00 SHIPPED!
Trans Am License Plate Filler (Brand new, has some minor flaws fromt sitting around) $75.00
C5 GM Tail Lights BRAND NEW (perfect shape!) $100.00
GM 2 Bar Map Sensor used for 1,500 miles $35.00
GM Injectors ZR1 52lbs 10,000 miles $185.00
Injectors Lot 36lbs used for 30-40k miles. I have MULITIPLE SETS $75.00set
GM LS2 Coil Covers VERY LOW MILES, EXCELLENT SHAPE! $100.00set
DRIVESHAFT SHOP PONTIAC 2004-2006 GTO 108mm Bolt-on Differential Stubs (for stock GTO differential with replaceable spline section) BRAND NEW! Only out of the box for pictures. $525.00
DeatschWerks Fuel Pump - DW65c
Part #:9-652-1008
I am asking $139.00
If you have any questions about any item, please feel free to ask. Thanks
PICTURES BELOW!!!
Last edited by Ky_Dragracer; 04-11-2015 at 09:03 AM.
