LT1 T56 Lakewood QuickTime Bellhousing, GT4202 Garrett 74mm Turbo, 374 Heads
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Mar 2013
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
LT1 T56 Lakewood QuickTime Bellhousing, GT4202 Garrett 74mm Turbo, 374 Heads
Brand new with all hardware. I went with a McLeod piece instead. Im in Cleveland OH.
Paid over $600 a few months ago. $500 shipped.
Paid over $600 a few months ago. $500 shipped.
Last edited by 92Bwagon; 11-30-2015 at 12:05 AM.
#2
Teching In
Thread Starter
iTrader: (1)
Join Date: Mar 2013
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
GT4202 Garrett Turbo 74.5mm T6
About 10k miles of use then removed and kept in dry storage.
T6 flange, 1.15 compressor/.6 turbine. Good match for 6.0 motors. $500 plus actual shipping.
Will be posting the rest of the turbo setup once i pull the part numbers. Matched Tial BOV/Wastegate. 31" OBX intercooler, SBC flex crossover etc.
T6 flange, 1.15 compressor/.6 turbine. Good match for 6.0 motors. $500 plus actual shipping.
Will be posting the rest of the turbo setup once i pull the part numbers. Matched Tial BOV/Wastegate. 31" OBX intercooler, SBC flex crossover etc.
#5
Teching In
Thread Starter
iTrader: (1)
Join Date: Mar 2013
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
OBX Intercooler, Tial Wastegate and BOV
The intercooler is an OBX unit with core dimensions of 11.75" x 23.5" x 3"
The wastegate is a Tial sport unit with part number SN01050825. The bore on it measures out at 39.5 (I'm assuming it is actually supposed to be 40) mm. The BOV is also a Tial unit with part number SN02051231 and the bore on it measures out at 47 mm. For the Tial stuff I've tried to search the part number before online and came up with nothing. Probably an internal part number that they could reference if called. They are both nice looking units.
The crossover is passenger side mount wtih a T6 flange and external wastegate mount. There is one o2 sensor on the front.
I also have a manual boost controller.
The wastegate is a Tial sport unit with part number SN01050825. The bore on it measures out at 39.5 (I'm assuming it is actually supposed to be 40) mm. The BOV is also a Tial unit with part number SN02051231 and the bore on it measures out at 47 mm. For the Tial stuff I've tried to search the part number before online and came up with nothing. Probably an internal part number that they could reference if called. They are both nice looking units.
The crossover is passenger side mount wtih a T6 flange and external wastegate mount. There is one o2 sensor on the front.
I also have a manual boost controller.