89LS1RS

iTrader: (1)

i am in need of a couple lsx shortblocks, or bare blocks. let me know what you have

i am also looking for a 93-02 camaro front end( hood, fenders, bumper, lights)

i might be willing to trade on a new racecraft cromoly kmember/aarm setup.

itsjustaSB

iTrader: (13)

pics for ya

soulefood

iTrader: (1)

i have a 5.3L block at the machine shop i have to pick up. it has been bored to 99mm (stock ls1) and honed. it has also been hottanked and had new cam bearings installed. i also have the stock 5.3 crank which is the same as the LS1-LS6 however the common difference is that in the 2500 and heavier duty pickup trucks have a thicker rear seal surface width. the crank journals are in great shape and have been polished also. i also have the rods which are also the same as the LS1 rods at a 6.096 inch length conn rod. the rods were cleaned and checked for trueness. the crank, rods, and block are all in good condition. I also have the stock heads which are in great condition. i have everything for the shortblock so let me know what you want...... and make an offer!

massconfusion

iTrader: (18)

have a camaro long block in good shape and a vett ls1 maybe an ls6 not sure. both look very good. $700 for the long block and 400 for the shorty. i can deliver seeing as your in chicago

cubezilla

iTrader: (6)

I HAVE a LS2 short block 4 inch stroker , eagle rotating assembley, 30 over mahle pistons new and assembled with a 598 lift cam and new lifters and double roller chain. 2850.00

madmac9

I've got a hood&drivers-side fender,cheap.PM me.