WTB: AC Lines & Sensor, PCV Hose, DBW Harness.
08-07-2009, 07:33 AM
#1
Teching In
Thread Starter
Join Date: Apr 2008
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
WTB: Random Engine Parts I'm doing a motor swap into another car but the motor is out of a 99 Vette.
I need the following:
-3 Bellhousing Bolts (the bolts that hold the bell housing to the block)
-PCV Hoses, specifically the one that goes around the back of the motor (mine got cracked putting the engine in)
-Engine Lift Brackets + bolts (the brackets mounted to the heads that you can lift the engine from)
C5 Vette Specific:
-New Serpentine Belt (PS/Alt)
-Complete Fuse Box for Engine Harness
-AC Hoses that attach to the back of the compressor (AFAIK this is vette specific)
-AC sensor that goes nto one of those hoses (AFAIK this is vette specific)
-Corvette Gas Pedal Harness (the one that runs between the pedal and the TAC module)
I'm located in NH
I need the following:
-3 Bellhousing Bolts (the bolts that hold the bell housing to the block)
-PCV Hoses, specifically the one that goes around the back of the motor (mine got cracked putting the engine in)
-Engine Lift Brackets + bolts (the brackets mounted to the heads that you can lift the engine from)
C5 Vette Specific:
-New Serpentine Belt (PS/Alt)
-Complete Fuse Box for Engine Harness
-AC Hoses that attach to the back of the compressor (AFAIK this is vette specific)
-AC sensor that goes nto one of those hoses (AFAIK this is vette specific)
-Corvette Gas Pedal Harness (the one that runs between the pedal and the TAC module)
I'm located in NH
Last edited by twistedsymphony; 09-01-2009 at 11:13 AM. Reason: added some items
