WTT: heads/studs for nitrous setup
01-07-2007, 04:25 PM
#1
WTT: heads/studs for nitrous setup Looking for a 90mm ls1 plate kit, either the NOS one or the one that nitro dave sells (preferrably his dual stage one) Kit must be complete, with all the needed stuff to install (bottle, brackets, preferrable ones I can mount on the tunnel between the rear seats, blowdown setup, window switch, preferrably a digital one, noids, linies, etc.etc.)
I have a set of 243 casting ls6 heads, ported by CNC in florida, originally doen for noyzee's nitrous 346 setup. With a 200 shot his car ran 9.6 with them... I knwo they flow over 300 @ 600 lift, I can get flow data from CNC if needed. I also have a set of ARP head studs I will include with the heads, they are standard 6 pt studs used for about 500 miles.
I also have a spohn chassis mount tq arm, if someone has a good DP setup and wants to trade for that, I'll include the tq arm to add some more value to what I have.
I have a set of 243 casting ls6 heads, ported by CNC in florida, originally doen for noyzee's nitrous 346 setup. With a 200 shot his car ran 9.6 with them... I knwo they flow over 300 @ 600 lift, I can get flow data from CNC if needed. I also have a set of ARP head studs I will include with the heads, they are standard 6 pt studs used for about 500 miles.
I also have a spohn chassis mount tq arm, if someone has a good DP setup and wants to trade for that, I'll include the tq arm to add some more value to what I have.
