hand help programer
02-05-2009, 04:08 PM
#1
On The Tree
Thread Starter
iTrader: (7)
Join Date: Dec 2008
Location: elizabethtown.ky
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
hand help programer just checking to see if anyone has used a hand help programer to tune for a cam change and how big was the cam.i have a diablosport predator programer just want to know if i can use it.called them they said idle change only.thanks for the help
02-05-2009, 04:21 PM
#2
Well, you can change much more than idle with the Predator, but to properly tune for a cam you will need to access many other tables within the PCM, which you cant do through the Predator.
You could take the car to any of our CMR tuning dealers and have them dial the car in on the dyno with our CMR tuning software. This will allow them to load the custom tune right to your Predator, allowing you the ability to still adjust it down the road if need be.
Thanks
Mike
You could take the car to any of our CMR tuning dealers and have them dial the car in on the dyno with our CMR tuning software. This will allow them to load the custom tune right to your Predator, allowing you the ability to still adjust it down the road if need be.
Thanks
Mike
02-05-2009, 05:14 PM
#3
On The Tree
Thread Starter
iTrader: (7)
Join Date: Dec 2008
Location: elizabethtown.ky
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
wow great deal i didnt know that.ok where can i fine one.my zip code is 42701.i found dealers with a dyno but they dont answer there phones.can you give me another # to them
02-08-2009, 08:24 PM
#7
On The Tree
Thread Starter
iTrader: (7)
Join Date: Dec 2008
Location: elizabethtown.ky
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
they do but i think it the hypertech 3 only but dont hold me to that.i had a 1998 ws6 its in a class by its self so i sold it and bought a 2000 ws6.if im not mistaken 1999 and up you can get all the better hand held.but some will jump in and tell us.