LS2 SD tune, what else do I need to do?
09-15-2009, 10:05 AM
#1
LS2 SD tune, what else do I need to do? So I've been building myself an SD tune with the MAF disable (not yet taken out) and so far I've done the VE table and AFR error to almost 0.
Average STFTs cruising and part throttle are between 0 and -3 and at WOT they are 0.
AFR error I got down to 1% and actual AFR is just about 12.63 across the board.
Is there anything else that I need to look for/tune for a nicely running speed density tune? I've done all the other stuff (tq management, timing, rev limiters etc) for a tune, just wondering if there is anything else I need besides the VE table for SD.
Average STFTs cruising and part throttle are between 0 and -3 and at WOT they are 0.
AFR error I got down to 1% and actual AFR is just about 12.63 across the board.
Is there anything else that I need to look for/tune for a nicely running speed density tune? I've done all the other stuff (tq management, timing, rev limiters etc) for a tune, just wondering if there is anything else I need besides the VE table for SD.
