PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

New set-up.. New Hp Tune... any comments welcome..

Thread Tools
 
Search this Thread
 
Old 04-15-2010, 10:27 PM
  #1  
TECH Resident
Thread Starter
iTrader: (1)
 
BLUEBYU's Avatar
 
Join Date: Dec 2001
Location: Overland Park, KS, USA
Posts: 933
Likes: 0
Received 0 Likes on 0 Posts
Default New set-up.. New Hp Tune... any comments welcome..

Comp Cam 232/234/112, Granitelli Maf, LS6 intake, TEA Stage II heads, Hooker LT's... Any input is appreciated. Thanks.
Attached Files
File Type: hpt
VE & MAF LTFT TUNE Rev 2.hpt (446.6 KB, 334 views)
Old 04-15-2010, 10:58 PM
  #2  
TECH Apprentice
iTrader: (39)
 
Snapps's Avatar
 
Join Date: Apr 2004
Location: Fort Wayne, IN
Posts: 333
Received 2 Likes on 2 Posts

Default

Well from my personal experience the Granitelli maf was causing more problems when the car was getting tuned. Put the stocker back on an it fixed the problems. Just my advice ditch the maf an go back to stocker or speed density tune..
Old 04-16-2010, 12:36 AM
  #3  
TECH Resident
Thread Starter
iTrader: (1)
 
BLUEBYU's Avatar
 
Join Date: Dec 2001
Location: Overland Park, KS, USA
Posts: 933
Likes: 0
Received 0 Likes on 0 Posts
Default

Seems to resonding well...but know the spark tables are more agressive. i did not want t0 set them so high, but the IAC'S are around 70. I know is running rirh w/ the o'2 at 925/950.
Old 04-16-2010, 01:01 AM
  #4  
TECH Resident
Thread Starter
iTrader: (1)
 
BLUEBYU's Avatar
 
Join Date: Dec 2001
Location: Overland Park, KS, USA
Posts: 933
Likes: 0
Received 0 Likes on 0 Posts
Default Latest scan before VE/MAT TUNE

Any input... going to dyno this week. Thanks.
Old 04-16-2010, 01:12 AM
  #5  
TECH Resident
Thread Starter
iTrader: (1)
 
BLUEBYU's Avatar
 
Join Date: Dec 2001
Location: Overland Park, KS, USA
Posts: 933
Likes: 0
Received 0 Likes on 0 Posts
Default Latest scan before VE/MAT TUNE

Hope this helps. Thanks.
Old 04-16-2010, 01:17 AM
  #6  
TECH Junkie
iTrader: (33)
 
JonCR96Z's Avatar
 
Join Date: Jan 2003
Location: Asheboro, NC
Posts: 3,005
Likes: 0
Received 18 Likes on 10 Posts

Default

Does it drive good like that? You got 20 degrees too much idle timing.

What injectors do you have?
Old 04-16-2010, 02:06 PM
  #7  
TECH Resident
Thread Starter
iTrader: (1)
 
BLUEBYU's Avatar
 
Join Date: Dec 2001
Location: Overland Park, KS, USA
Posts: 933
Likes: 0
Received 0 Likes on 0 Posts
Default

Yes it idles and drives very good. The idle set at 950 seems to match the spark bc the IAC's are @ 70ish when up to temp. The injectors are Ford 30# Redtops. I know the scaling is different than I have seen on some of the sites, but my original tune with the TR224 had these numbers and no issues. The idle and base spark idle is high.




All times are GMT -5. The time now is 07:39 AM.