turbo_v8_s10

iTrader: (9)

I am wondering if it is possible to use a ls9 computer with the 3x cam and 58 reloctor wheel on my lq9 block? I am looking to be able to make big power on a Maf sensored car with out the limitations of the ls1 computer. I plan on turboing the car so I also need to know if it is possible to deleat all the blower sensors? <---This is the big question

macca_779

Come again.. You don't want to use an LS1 controller.. Thats a first. If the MAF is your only concern, get rid of it and tune it properly.. In SD.

ringram

Nothing wrong with the ls1 ecu with a custom OS for boost etc.
That being said, as he has a 58x crank then he might as well run an E38 or E67

wait4me

iTrader: (10)

Yes you can turn off that stuff. Hennessey is using that controller in thier Venom GT. It made 980 hp to the wheels i think at 6000rpms..

http://www.youtube.com/watch?v=trkiB...layer_embedded

wait4me

iTrader: (10)

That 930hp as shown in the vid is where it was backed down to. So that it was safer for 93oct..

turbo_v8_s10

iTrader: (9)

How do you make a custom os for the ls1 ECM? And will it allow me to get around the 512g/second limitation on the maf?