Go Back   LS1TECH > LS1-LS2-LS3-LS6-LS7 PERFORMANCE > PCM Diagnostics & Tuning
Sign in using an external account
Register Forgot Password?
Search

PCM Diagnostics & Tuning
HP Tuners | AutoTap | Diablo | MAF Translator | HPP3 | FAST | Gen7 | Big Stuff 3
Sponsored by
Diablo Sport

Whos using a Innovative LC-1 with HPT Pro?

Reply
 
Thread Tools Search this Thread
Old 05-07-2012, 09:20 PM   #1
TECH Enthusiast
 
speedfreak2685's Avatar
 
Trader Rating: 12
Join Date: Jul 2005
Posts: 632
Default Whos using a Innovative LC-1 with HPT Pro?

I'm ordering my LC-1 wideband this week and was wondering how much of a PITA it was to hook into your HP Tuners pro box. I am going to also have it wired into my a pillar gauge to use all the time. Is there a separate set or wires that you maybe roll up and put in the glove box or something that you can hook up to the box and still use the a pillar gauge? I'm kinda confused at how all this hooks up to be honest. Any pics or advice on how this instals would be much appreciated!
speedfreak2685 is offline   Reply With Quote
Old 05-07-2012, 09:25 PM   #2
TECH Fanatic
 
Trader Rating: 0
Join Date: Jan 2010
Location: South of Augusta,GA
Posts: 1,332
Default

Mine works! Theres a small cable that has a yellow wire that go to the box, and ground the other. It has a small jack to be used for tunning also. I use the yellow wire, my in dash gauge works all the time.
MillsMotorvation is offline   Reply With Quote
Old 05-07-2012, 09:27 PM   #3
TECH Apprentice
 
Trader Rating: 0
Join Date: Dec 2011
Location: ny
Posts: 320
Default

its pretty easy and theres a config for hptuners on their forum just search it or email bill. they are one of the best
__________________
2000 camaro, v6, auto, m90 supercharged, true duals, koni's/bmrs and misc other stuff.... low 13's. now that i can beat them im gunna join them
bwkmaro is offline   Reply With Quote
Old 05-07-2012, 09:29 PM   #4
TECH Enthusiast
 
speedfreak2685's Avatar
 
Trader Rating: 12
Join Date: Jul 2005
Posts: 632
Default

Quote:
Originally Posted by MillsMotorvation View Post
Mine works! Theres a small cable that has a yellow wire that go to the box, and ground the other. It has a small jack to be used for tunning also. I use the yellow wire, my in dash gauge works all the time.
Pretty simple install? So you have your gauge installed permanatly as well as a separate set of wires in your glove box when you want to hook it up to log afr on HPT when you want correct? Did you have to buy any separate harnesses of wires other than what already comes with the LC-1?
speedfreak2685 is offline   Reply With Quote
Old 05-07-2012, 10:06 PM   #5
On The Tree
 
RGSS's Avatar
 
Trader Rating: 2
Join Date: Apr 2007
Posts: 141
Default

I have an LC1 running an A/F gauge full time and a separate set of wires i use to connect to the HPtuners too.
No separate harness needed.
The LC1 has two outputs. I used one or the gauge and one for the HPT.

Click the image to open in full size.

Click the image to open in full size.
__________________
BLACK 1996 Z28 with an LS7 Swap

RED '87 RX7/385 LT1 LE2 SWAP-RUNNING HARD

SILVER 1998 Z28 M6 DD
RGSS is offline   Reply With Quote
Old 05-07-2012, 11:27 PM   #6
TECH Fanatic
 
67SS&99SS's Avatar
 
Trader Rating: 4
Join Date: Feb 2004
Location: Georgia
Posts: 1,212
Send a message via AIM to 67SS&99SS
Default

I used this and it was very helpful after I got the wideband installed in the car.

http://www.hptuners.com/forum/showthread.php?t=28176
__________________
1967 Camaro SS: 406 sbc 522 HP, 514 FT LBs|4 speed|3.73s|Posi|weld-in sfc|traction bars
1999 Camaro SS:A4|Jet Hot LTs|GMMG|CME|LS6|SLP|TT2s|UMI SFC
67SS&99SS is offline   Reply With Quote
Old 05-09-2012, 01:38 AM   #7
TECH Fanatic
 
Trader Rating: 0
Join Date: Jan 2010
Location: South of Augusta,GA
Posts: 1,332
Default

Quote:
Originally Posted by speedfreak2685 View Post
Pretty simple install? So you have your gauge installed permanatly as well as a separate set of wires in your glove box when you want to hook it up to log afr on HPT when you want correct? Did you have to buy any separate harnesses of wires other than what already comes with the LC-1?
No other wires needed they come with the kit, they splice off the harness. My wires come out on driver side near OBII plug, and my gauge is in the dash.
Attached Thumbnails
Whos using a Innovative LC-1 with HPT Pro?-cell-phone-pics-vid-179.jpg   Whos using a Innovative LC-1 with HPT Pro?-cell-phone-pics-vid-221.jpg  
MillsMotorvation is offline   Reply With Quote
Old 05-09-2012, 01:38 AM
LS1Tech
Pontiac Firebird




Paid Advertisement
Reply


Tags
gauge, hook, hp, hpt, hptuner, hptuners, innovate, innovative, lc1, ls1tech, output, running, tuner, tuners, ups, wire, wiring


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off



Join Ls1Tech

All times are GMT -5. The time now is 01:20 PM.


Powered by vBulletin® Version 3.8.7 AC1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Advertising - Terms of Service - Privacy Statement - Terms of Service - JOBS
Emails & Contact Details