PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

Fast 102 woes

Thread Tools
 
Search this Thread
 
Old 08-20-2012, 10:34 AM
  #1  
Staging Lane
Thread Starter
iTrader: (4)
 
derrickman05's Avatar
 
Join Date: Oct 2005
Posts: 99
Likes: 0
Received 0 Likes on 0 Posts
Default Fast 102 woes

So I have a fast 102/102 set up with a stock maf. My idle will be great at about 950 for any amount of time but then it will gradually shoot up to 3k. It sometimes comes back down. My ltft will climb up to 25 and stft will hit 40's. I have set my etc area scaler to .0122 for the new TB. It acts like a vacuum leak but I have gone through a can of starter fluid and found nothing.
Old 08-20-2012, 02:47 PM
  #2  
TECH Fanatic
iTrader: (45)
 
Undertow74's Avatar
 
Join Date: Oct 2007
Location: Washington
Posts: 1,269
Received 12 Likes on 11 Posts

Default

mine was actually cracked at the back of the manifold by the rear most injector where the 2 halves are bolted together.....just FYI and it did the same thing
Old 08-20-2012, 04:40 PM
  #3  
Staging Lane
Thread Starter
iTrader: (4)
 
derrickman05's Avatar
 
Join Date: Oct 2005
Posts: 99
Likes: 0
Received 0 Likes on 0 Posts
Default

Yes! I found a small leak at the back. I then turned off my maf and was able to tune with just the VE tables and once I got it to not have add fuel on its own I turned the maf back on and adjusted until it was not adding any fuel on its own. It idles great. On to some more tuning. I bet I've logged 20hours in 3 days. Just reading and learning.




All times are GMT -5. The time now is 04:48 PM.