Can Someone Please Help Me Figure Out This Freeze Frame DATA
08-05-2013, 08:03 PM
#1
TECH Regular
Thread Starter
Join Date: Dec 2012
Location: San Diego
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
Can Someone Please Help Me Figure Out This Freeze Frame DATA Ok so i have been getting those pesky Knock Sensor codes P0332. Its says both sensors have low voltage and they are brand new AC Delco Sensors. Now i am going to be replacing the pigtail wiring harness because i didnt replace that when i replaced the sensors. So heres my Freeze frame data. Does anything look weird here?
P0332
Fuel Sys 1 CL
Fuel Sys 2 CL
Calc Load ( % ) 14.9
ECT *F 190
STFT B1 (%) 3.9
LTFT B1 (%) -0.8
STFT B2 (%) 4.7
LTFT B2 (%) -0.8
MAP (inHg) 16.2
Eng RPM 2107
Veh Speed (MPH) 45
MAF (lb/min) 5.6
TPS (%) 8.6
Anything look strange, screwed up, or out of place. Thanks for ur input and suggestions guys.
P0332
Fuel Sys 1 CL
Fuel Sys 2 CL
Calc Load ( % ) 14.9
ECT *F 190
STFT B1 (%) 3.9
LTFT B1 (%) -0.8
STFT B2 (%) 4.7
LTFT B2 (%) -0.8
MAP (inHg) 16.2
Eng RPM 2107
Veh Speed (MPH) 45
MAF (lb/min) 5.6
TPS (%) 8.6
Anything look strange, screwed up, or out of place. Thanks for ur input and suggestions guys.
08-07-2013, 08:01 AM
#4
On The Tree
iTrader: (2)
Join Date: Nov 2011
Location: bayville n.j.
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
Freeze frame dosn't relate. Harness good idea if still n.g. then follow fault code chart and diag. as stated. Then ask if still no sense I am sure you will get help.
