E40 pcm with GEN III motor
#1
E40 pcm with GEN III motor
I was suggested a E40 pcm (since it reads 24x signal) from this thread, to use with a GEN III LQ4/LQ9 engine.
https://ls1tech.com/forums/generatio...lq4-9-58x.html
After some searching through some LS book reading material I have it looks like the follow vehicles use E40 PCM.
2004-2006 Buick Rainier
2005 Corvette
2005-2006 Chevrolet ssr
2005-2006 trailblazer
2006 trailblazer ss
2005-2006 GMC Envoy
2005-2006 pontiac GTO
All of these are capable of being tuned for a GEN III motor? Just want to be 100% before I pull the trigger on one.
https://ls1tech.com/forums/generatio...lq4-9-58x.html
After some searching through some LS book reading material I have it looks like the follow vehicles use E40 PCM.
2004-2006 Buick Rainier
2005 Corvette
2005-2006 Chevrolet ssr
2005-2006 trailblazer
2006 trailblazer ss
2005-2006 GMC Envoy
2005-2006 pontiac GTO
All of these are capable of being tuned for a GEN III motor? Just want to be 100% before I pull the trigger on one.
#2
Launching!
Join Date: Jan 2012
Location: Davisburg, MI
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
The E40 has a lot of tuning limitations and not a lot of support as it was only used two years. There are many more people running the LS1-B, more custom OSs, more people that can and might help you.