rpm-inc

iTrader: (2)

I installed a used cruise/signal stalk on my 2007 express 2500 4.8 that did not come from the factory with cruise. Everything plugged right in, but cruise doesn't work. I had some hope it would after my buddy did it on his dmax express.

Anyways, do I need to get the pcm flashed? I do have the pcm from the 05 4.8 that the stalk came from, but the 05 is dbc, and my 07 is dbw.

Thanks.

rpm-inc

iTrader: (2)

Anybody??? Got a road trip coming soon.:-)

rpm-inc

iTrader: (2)

High mount brake light fuse was blown. Cruise works!!!

Shaggykjb

Did you have a DBW setup? The TCM just needed the stalk plugged in?

rpm-inc

iTrader: (2)

Yes my 07 is dbw. I used a stalk from an 05 dbc. Just plugged it into the column. The extra connector for cruise is there.

joecar

Good to know, thanks for sharing.

rpm-inc

iTrader: (2)

If anybody reading this has a dbc express, I have a cruise module you can have for shipping. I am assuming the connector for the module is there.