Last edit by: IB Advertising
"See related guides and technical advice from our community experts:
- Camaro and Firebird How to Reset ECU
Step by step instructions for do-it-yourself repairs.
Does pulling the negative battery terminal reset the computer?
#1
Does pulling the negative battery terminal reset the computer?
Hello all. I swapped MAF and I wanted to reset the computer. I disconnected the negative battery terminal for about 30 minutes thinking this would do it. When I started the car again the radio presets were still there. Did I reset the thing or do I need to pull a series of fuses? Thanks in advance.
#3
Originally Posted by calongo_SS
I think it's gonna take at least an hour to reset it unplugging the battery. There are 2 fuses that you can pull, but I don't remember which ones, maybe someone else will chime in.
My battery was disconnected today (positive side) for my QTP header install and my radio presets remained intact after reconnecting as well but the clock was off/wrong, I think the radio has internal memory for a few hours of no power.
The two fuses to pull are the 'PCM BAT' and 'PCM IGN' I think but I like the overnight battery disconnect method better.
#4
TECH Fanatic
Join Date: Nov 2001
Location: Mi./Al.
Posts: 1,757
Likes: 0
Received 0 Likes
on
0 Posts
Clearing computer.
1.Turn key to the On postion but don't start the car.
2. Remove PCM Bat and PCM Ing. fuses, they are located in the engine compartment.
3. Wait 5-10 minutes then turn the ignition key off.
4. Replace the fuses and start the car.
1.Turn key to the On postion but don't start the car.
2. Remove PCM Bat and PCM Ing. fuses, they are located in the engine compartment.
3. Wait 5-10 minutes then turn the ignition key off.
4. Replace the fuses and start the car.