Help! Need source for connector
02-27-2005, 09:42 PM
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jun 2004
Location: SF Bay Area
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Help! Need source for connector Hello,
My previous post on harness extensions didn't get much in the way of responses, and I've emailed all the harness builders and no one seems to have what I'm looking for--so I might have to build it myself.
Does anyone know who makes the large connectors used on the LS1 PCM? I'd need male and female connectors. It's possible that they come from this family:
http://www.delphi.com/pdf/c/micro-pack.pdf
I know that the male connectors (harness side) are GM part numbers 12191488 and 12191489, but I don't know where to source and in-line version of the female connector. (The one on the PCM is a board-mount style.)
So I'm wondering if any of the electrical gurus out there might know how best to source that part (and the necessary crimp tool and terminals),
-ch
My previous post on harness extensions didn't get much in the way of responses, and I've emailed all the harness builders and no one seems to have what I'm looking for--so I might have to build it myself.
Does anyone know who makes the large connectors used on the LS1 PCM? I'd need male and female connectors. It's possible that they come from this family:
http://www.delphi.com/pdf/c/micro-pack.pdf
I know that the male connectors (harness side) are GM part numbers 12191488 and 12191489, but I don't know where to source and in-line version of the female connector. (The one on the PCM is a board-mount style.)
So I'm wondering if any of the electrical gurus out there might know how best to source that part (and the necessary crimp tool and terminals),
-ch
02-27-2005, 09:59 PM
#2
TECH Senior Member
may wanna email the folks at speartech?
http://www.speartech.com/compreprog.html if they can get 1 end maybe they can get botH?
http://www.speartech.com/compreprog.html if they can get 1 end maybe they can get botH?
03-05-2005, 11:07 PM
#3
Staging Lane
iTrader: (7)
Join Date: Nov 2004
Location: Stratford,Ct
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
You may also try Caspers electronics, Talk to John, He made me female side ecm connector for my buick with leads on them so i could make a jumper harness for the Fast XFI box
