Stroker 1500

iTrader: (1)

Does anyone know how dynamic airflow is calculated? Im trying to dial in my maf table but i don't have the option to log dynamic cylinder air. Since i don't have that is there some other things i can log and make calculations to figure that out? any ideas of what to do to dial in the maf table? the write up in the sticky won't help me out at all if i can't log that pid...

Help please

Stroker 1500

iTrader: (1)

someone, anyone... help

Another_User

You should post this question over on the HPTuners forum. I think the calculation is in a post on here, but I forgot which one.

"Luke...use the SEARCH Luke..."

HumpinSS

iTrader: (1)

"Ve table cracked is the post

Stroker 1500

iTrader: (1)

Alright well i have read that and im still not 100% sure what those calculations where used for. It says one or 2 posts down that the VE results won't be accurate if the maf is off.... Since im trying to get the maf calculated properly the results i would get to change the maf settings would be wrong since the result for the ve would be off which would be used to calculate the cylinder air right?