just logged in datamaster, now what?
04-17-2005, 02:58 PM
#1
Launching!
Thread Starter
iTrader: (3)
Join Date: Dec 2004
Location: BAY AREA AND LOS ANGELES
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
just logged in datamaster, now what? i just used datamaster to log a run down the freeway. i was in fourth gear and from 2000rpm to about 5000 i had it floored. i went from about 50mph to 90. now what do i change by looking at this file. i know i need a dyno run to make better changes but is there anything i could change without the dyno. here is my file
http://splitsecondracing.net/files/1.uni
also u can see it says like 2K knock counts then during my run it climps to like 5K. shouldn't that knock count be 0. ive logged before from idle to about 20 miles an hour, of easy driving, and the knock counts were still a couple grand.
http://splitsecondracing.net/files/1.uni
also u can see it says like 2K knock counts then during my run it climps to like 5K. shouldn't that knock count be 0. ive logged before from idle to about 20 miles an hour, of easy driving, and the knock counts were still a couple grand.
