Question regarding LS1 edit?
01-10-2006, 11:19 AM
#1
Staging Lane
Thread Starter
Join Date: Apr 2003
Location: Ohio
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Question regarding LS1 edit? My car is throwing a 02 sensor heater malfunction code and causing the SES light to stay on and no matter how many times I have it cleared it keeps coming back within 50 miles of driving. So my question is can I delete this code completely from my cars computer with LS1 edit or does it just clear the code? Thanks.
-Ben
-Ben
01-10-2006, 11:35 AM
#2
Ben,
Didn't I tune your car? Don't you have the C5 O2's for your front O2's? They are known for slow switching in F-bodys.
You can delete the codes but I wouldn't recommend doing it. Best bet is to replace the O2 with a true OEM F-body O2. Cost about $70.00.
Bill
Didn't I tune your car? Don't you have the C5 O2's for your front O2's? They are known for slow switching in F-bodys.
You can delete the codes but I wouldn't recommend doing it. Best bet is to replace the O2 with a true OEM F-body O2. Cost about $70.00.
Bill
01-10-2006, 11:50 AM
#3
Staging Lane
Thread Starter
Join Date: Apr 2003
Location: Ohio
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Bill I had switched the 02's back but the code is still being thrown. My car was throwing the code before I put the Vettes 02 sensors in, so I dont think that they were the problem. Just getting sick at looking at the SES light, so I wanna get the code deleted for good. Thanks.
-Ben
-Ben