Atap Readings! Need some advice!
#1
TECH Enthusiast
Thread Starter
Join Date: Mar 2002
Location: ft worth tx
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
Atap Readings! Need some advice!
My car has been running so so, for about the last two weeks, so I decided to atap and found some really wierd readings. First of all when cruising lterms are slightly positive around 1-2% and my o2 readings are very lean around .7-.6. Then when I go WOT my o2 readings are at .9-.91 but my timing never gets above 22 degrees. And in the third gear and fourth around 5800-5900 I get around 4 degrees of knock retard. What can I do to remidy this? I was told to change the plugs as I may have a misgap from the factory? Car has 10k on the clock. Maybe a MAFT??
Thanks
Thanks
#2
TECH Veteran
iTrader: (2)
Join Date: Nov 2001
Location: Warsaw, Va
Posts: 4,316
Likes: 0
Received 0 Likes
on
0 Posts
Re: Atap Readings! Need some advice!
i may not be right, but you can only read your 02's at WOT.. .90 is about average for them at WOT.
the 4 degrees of knock are whats messing your timing up. If you can get rid of the knock then your timing should be back up around 26-27
is anything banging under your car?? your running 93 gas right?
the 4 degrees of knock are whats messing your timing up. If you can get rid of the knock then your timing should be back up around 26-27
is anything banging under your car?? your running 93 gas right?
#3
TECH Enthusiast
Thread Starter
Join Date: Mar 2002
Location: ft worth tx
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
Re: Atap Readings! Need some advice!
yes running 93, I had a pulley installed a couple weeks ago but was pretty sure it was installed correctly. maybe not?