Looking for timing tables
05-23-2006, 09:41 AM
#1
11 Second Club
Thread Starter
iTrader: (2)
Join Date: Dec 2003
Location: Montgomery, AL.
Posts: 535
Likes: 0
Received 0 Likes
on
0 Posts
Looking for timing tables I am looking for HP Tuner timing tables for a 250-shot of N20. Thank you in advance to anyone who can help.
Jim C.
Jim C.
05-23-2006, 10:41 AM
#2
TECH Fanatic
iTrader: (4)
Join Date: May 2002
Location: Fairview Heights Illinois
Posts: 1,851
Likes: 0
Received 0 Likes
on
0 Posts
The high & low octane timing tables are what you're looking for.
You'll want to do some datalogging as well to find out where in the table you are running when WOT.
You'll want to do some datalogging as well to find out where in the table you are running when WOT.
05-25-2006, 05:51 PM
#3
Teching In
Join Date: Apr 2005
Location: Vette Juliet, TN
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
You could just use stock minus 10 for all values above your nitrous engagement point (this uses the old 2 degrees retard for every 50 hp of nitrous shot rule).
Last edited by Nithros; 05-30-2006 at 06:54 AM.