PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

Weird LTFTs

Thread Tools
 
Search this Thread
 
Old 09-21-2006, 01:52 PM
  #1  
On The Tree
Thread Starter
iTrader: (62)
 
2000RedZ's Avatar
 
Join Date: Feb 2005
Location: CA
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts

Default Weird LTFTs

My LTFTs are at 25 on both banks on my car, but my wideband reads 10.1 afr, whats going on and could that be a reason my car runs like s***.
Old 09-21-2006, 04:59 PM
  #2  
TECH Enthusiast
 
dynocar's Avatar
 
Join Date: Sep 2004
Location: Omaha, NE
Posts: 564
Likes: 0
Received 0 Likes on 0 Posts
Default

When does your wideband read 10.1 and your trims show 25, during idle, cruise or wide open throttle? Example, if it is during WOT only, this means that your fuel map is way to lean during cruise setting the trims high and applying extra fuel at WOT where it doesn't need it. You may need some custom fuel tuning, especially in your cruise area.
Old 09-21-2006, 10:46 PM
  #3  
On The Tree
Thread Starter
iTrader: (62)
 
2000RedZ's Avatar
 
Join Date: Feb 2005
Location: CA
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts

Default

No its like that all the time idle, cruise, and WOT.
Old 09-22-2006, 09:04 AM
  #4  
TECH Enthusiast
 
dynocar's Avatar
 
Join Date: Sep 2004
Location: Omaha, NE
Posts: 564
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 2000RedZ
No its like that all the time idle, cruise, and WOT.
My first guess is that your two upstream O2s are not functioning either because they are not getting warm enough do to your LTs or they got contaminated do to a previously over rich condition. With your HPT I would force open loop and program a lean idle and see if those O2s respond to that. If not, try new O2s first.
Old 09-22-2006, 09:15 AM
  #5  
TECH Veteran
iTrader: (18)
 
SHINER's Avatar
 
Join Date: Sep 2005
Location: SW Houston
Posts: 4,185
Likes: 0
Received 0 Likes on 0 Posts

Default

replace o2's and MAF.
Old 09-22-2006, 09:56 AM
  #6  
LS1TECH Sponsor
iTrader: (2)
 
foff667's Avatar
 
Join Date: Jul 2003
Location: Clermont, FL
Posts: 7,986
Likes: 0
Received 3 Likes on 3 Posts

Default

I say replace the motor, rear end & seats honestly get to the bottom of the problem before you just start replacing part after part, are there any codes showing up that might point you in the right direction?
Old 09-22-2006, 12:58 PM
  #7  
On The Tree
Thread Starter
iTrader: (62)
 
2000RedZ's Avatar
 
Join Date: Feb 2005
Location: CA
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts

Default

No, no codes at all, and I have my wideband functioning as the narrowband also on bank 1, but I have no idea.




All times are GMT -5. The time now is 07:35 PM.