throwing knock sensor codes with new motor
04-04-2007, 04:55 PM
#1
Staging Lane
Thread Starter
Join Date: Dec 2004
Location: Summersville, WV
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
throwing knock sensor codes with new motor Recently put a rebuilt ls1 back into my 02 camaro.
The motor was decked, line bored, ported, polished, balanced, forged pistons, new rings, hardoned pushrods, 3 angle valve job, new bearings.
it now has a small tick, nothing horrible, and i have heard this type of tick, sometimes worse in other cars, without a rebuilt motor.
no knocking, or other intrusive noises.
i continually get a pending and solid p0327 and p0332 which is both knock sensors low circuit voltage...any idea's?
The motor was decked, line bored, ported, polished, balanced, forged pistons, new rings, hardoned pushrods, 3 angle valve job, new bearings.
it now has a small tick, nothing horrible, and i have heard this type of tick, sometimes worse in other cars, without a rebuilt motor.
no knocking, or other intrusive noises.
i continually get a pending and solid p0327 and p0332 which is both knock sensors low circuit voltage...any idea's?
Last edited by stangkillerss; 04-05-2007 at 11:10 AM.
