3rd party hardware
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
3rd party hardware
Hey guys I have a Pass-thru device which is used to program computers on-car and off-board. It has full capability to read the OBDII systems in the car with the provided software but im looking for a little more then stock tunes.
Is there any way to integrate this into a existing program, its just needed for simple bolt-ons.
Hardware is a "Ease Diagnostics j2534 universal reprogrammer"
http://www.obd2.com/J2534/universal-reprogrammer.htm
Thanks!
Is there any way to integrate this into a existing program, its just needed for simple bolt-ons.
Hardware is a "Ease Diagnostics j2534 universal reprogrammer"
http://www.obd2.com/J2534/universal-reprogrammer.htm
Thanks!
#3
10 Second Club
iTrader: (4)
Join Date: Oct 2006
Location: wisconsin
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
i dont think you will find any tuning software that will work with that, but if you can communicate with the pcm and have the ability to read and flash it, you could have someone else modify your file for you and you could flash it to your pcm
jay
jay
#4
TECH Senior Member
iTrader: (7)
you can write make all of the software to allow it to work, I have used similar hardware for flashing pcms, but you will not find any tuning software, that works with j2534 hardware for lsx platforms, since the hardware is the "security" device to ensure that the tuning company gets paid for thier hard work.
Ryan
Ryan