98 + turn signal & DRL socket repair
#1
98 + turn signal & DRL socket repair
Here's the easy and better way to repair your turn signal and daytime running light bulb sockets.
No splicing required!
These sockets have two tabs on the sides. Depress these tabs and the socket guts come out from the bulb housing.
Remove your burned socket gut.
Remove the socket gut from a new socket and insert it into the original bulb housing.
Done! No splicing required!
No splicing required!
These sockets have two tabs on the sides. Depress these tabs and the socket guts come out from the bulb housing.
Remove your burned socket gut.
Remove the socket gut from a new socket and insert it into the original bulb housing.
Done! No splicing required!
The following users liked this post:
Winston (02-11-2024)
#2
Save the manuals!
iTrader: (5)
This thread has the part numbers for all the little components. They can be had inexpensively from Mouser: https://ls1tech.com/forums/general-m...ng-insert.html
Here's a picture of the socket disassembled:
This topic make me feel sticky...
Here's a picture of the socket disassembled:
This topic make me feel sticky...