Who has twin turbo their gto
#1
Staging Lane
Thread Starter
Who has twin turbo their gto
I知 starting to dis assembly my 04 gto to start the twin turbo process. Just seeing if anyone out there has done it and has tips and suggestions. I
using the cx racing kit essentially, but upgraded allot of stuff like fittings, flanges and what not so far.
thanks
using the cx racing kit essentially, but upgraded allot of stuff like fittings, flanges and what not so far.
thanks
#2
I have not done it but I知 interested in your results.
#3
Staging Lane
Thread Starter
Getting close to finishing this twin turbos set up. Just figuring out how to route my return line and finishing up some vacuum lines (did them all in -4 an)
The following users liked this post:
Lsxstvn (05-14-2021)
#5
Staging Lane
Thread Starter
[
QUOTE=Kfxguy;20351843]My advice is to move that return fuel line away from the hot side of the turbo.[/QUOTE]
As ofif now I think I知 going to run in on the inside of the passenger fuel rail then tie it with the feed all the way back. Using some of these clips I made and some clamps
QUOTE=Kfxguy;20351843]My advice is to move that return fuel line away from the hot side of the turbo.[/QUOTE]
As ofif now I think I知 going to run in on the inside of the passenger fuel rail then tie it with the feed all the way back. Using some of these clips I made and some clamps
#7
TECH Veteran
iTrader: (1)
I hope that is pc or nylon you printed. Sure as hell don't want pla under the hood. Abs (might) be ok.