Chump Car and WRL - LS1TECH



Road Racing Road Course | Autocross

Chump Car and WRL

Reply
 
Thread Tools Search this Thread
Old 02-09-2017, 02:35 PM   #1
Teching In
Thread Starter
 
Join Date: Nov 2005
Posts: 2
Default Chump Car and WRL

Since ChumpCar and World Racing League are endurance races that are either 12hours on Saturday or 7 hours Saturday and 7 hours Sunday what LS would best tolerate this abuse with the least modification. 4.8L or 5.3L or 6.0L or 6.2L and all the variations LS1, LS6,LQ4,L33 and on and on. Low RPM bigger displacement or 4.8L revver?
relic is offline   Reply With Quote
Old 02-10-2017, 03:55 PM   #2
LS1Tech Premium Sponsor
iTrader: (5)
 
BMR Tech2's Avatar
 
Join Date: Apr 2008
Location: Tampa FL
Posts: 4,066
Default

We also run the Mercedes too and it has a LS motor in it. When it was 1st built, it was an Aluminum block, but that blew up. So the guys put an Iron Truck LS in it. It threw off the Balance & Braking in the car. I won't drive it again!

BMR Tech2 is offline   Reply With Quote
Old 02-10-2017, 04:01 PM   #3
TECH Resident
 
Join Date: Oct 2006
Posts: 770
Default

They all take the same amount of abuse. Just make sure you have a baffled oil pan, an accusump and keep the revs under 6000. It will live a long life.
79_T/A is offline   Reply With Quote
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
50 kpa vacuum at idle after a cam swap s57_s2k Generation IV Internal Engine 9 01-24-2017 02:47 AM
Swap a 6.2L into a 2007 4.8L Silverado LS6BEAST Conversions & Hybrids 22 06-22-2016 03:54 PM
gm engine vin codes 64postman Conversions & Hybrids 2 07-07-2010 06:02 PM
any destroked builds out there LS1LT1CAM Forced Induction 10 11-13-2008 12:10 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -5. The time now is 08:43 PM.