SBC 383 (Well built) long block price
08-28-2015, 01:27 PM
#1
SBC 383 (Well built) long block price Category: Engine - Complete Motors
Price: $6800
Part Fits: Corvette, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird
Location (State): IA
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: Small Block
LS Engine?: Non-LS Part
GM 383 w/ internal balanced rotating assembly
Degrease and magnaflux the block
clean block for assembly
Surface the oil pan deck and install 4 bolt splayed main caps and fit caps to block
Bore and hone block with deck plate for 0.030
Block re-enforcement 1/3 fill of Hard Block
Machine block for rod clearance
True Deck block for 10:1 compression ratio
Remove and Replace Cam Bearings
Remove and Replace Frost plugs with brass and install oil galley plugs
Polish Crankshaft
Torque rods to spec and check big end for size, small end for pin clearance
Debur pistons and install spiral locks on pins
Internal Balancing and use of heavy metals
Balance the harmonic balancer
Balance the Flex Plate
Engine assembly hours
Line bore with splayed main caps installed
One pale of hard block
PC Seals
Pro Gear Adjustable (3 way) double roller
Cam bolts w/ locking plate
CHP-8T
H Style Rod and main bearing kit
Shop materials charge
JE Pistons - 105038
Eagle Ultra Light weight Crank
Melling hi volume Big block oil pump
Total Seal gapless rings
The engine is still sitting on the stand and has not been put in a car or started.
Short Block price with all items listed above $3800 obo
Surface Heads
CC Heads
Multi Angle valve job & verification of spring height (beehive springs)
*** Titanium valves 2.08/1.95 valves ***
Comp XFI 292 08-468-8
Comp 871-16
Comp 8302-16 Hi Tech Push Rods
Comp Titanium Retainers
Comp Roller Rockers
Canton 242-T
ATI Super Damper Aluminum Harmonic Balancer with aluminum hub (6 lb)
Fidenza Aluminum Flywheel
AFR 185 Perimeter bolt Heads
TPIS Mini Ram
TPIS Fuel Rails (new w/ new regulator)
AS&M Mono-blade
Long Block Price with all items listed is $6800, shipping is on top of negotiated price. and the long block parts can be taken off if your not wanting certain parts.
There is over 9000 invested in the machine work and parts.
