zrsnopro97

iTrader: (1)

Year: 1987
Make: Chevrolet
Model: C/K 10
Price: $4999
Mileage: 61000
Private or Dealer Listing: Private Listing
Location (State): IN
Color: Black
Transmission: Automatic
Drivetrain: Rear Wheel Drive

I've got a 1987 chevy R10 (c10 in '87). Bought it not running and have fixed it up and got it running great and now its time to move on to the next project. Drivetrain in the truck is very solid! It does need some body and interior work. Clean title in my name. Located in south bend indiana.

Details:

-1987 C10 with 61,000 on the odometer but title says its not accurate so I'm guessing its 161,000?
-Has a newer GM Goodwrench 350 crate engine. Doesn't smoke or leak anything.Gets good oil pressure. Nothing crazy, 4 bolt mains.
-Mild Comp Cam
-Hooker Longtube headers heat wrapped with ball and socket flanges welded on.
-Custom 3" to 4" Y-pipe with a 4" stainless borla Xr-1 muffler dumped at rear axle. Sounds great.
-Edelbrock Performer RPM manifold, Holley 600 performance 4 barrel carb.
-1" phenolic carb spacer
Gmpp valve covers
-New plugs, Jegs black 8mm wires, new petronix HEI distributor and internals.
-Brand new Large Summit Aluminum 3 row radiator, Spahl Electric Fan on a switch.
-New coolant and 180 thermostat, billet water neck. Runs right at 180.
TH350 trans, new filter and fluid.
-B&M shift kit, B&M shifter, B&M large trans cooler
-TCI 3200-3400 stall
-Rebuilt driveshaft
-Porterbuilt tubular transmission crossmember
-stock posi rear end
-Lowered with a flip kit in the back and springs up front
-Classic industries small side mirrors and steering wheel.
-Oil pressure and water temp gauges
-All new calipers, pads, rotors, brake lines, wheel bearings up front.
-No A/C, no heat, no radio
-Molded in rear roll pan and filled bed stake holes
-Big and little rally wheels with trim rings and centercaps. 275/60/15's out back.
-2 brand new GM steel front fenders. Installed but need shimmed to line up correctly.

Issues:
Body does have minor rust, mainly just bubbling. Will need one cab corner and a small patch piece in the passenger side floor. Also needs a small fix behind rear wheel well. Big stock mirrors were removed for smaller ones so there are 3 mounting holes in each door. Needs carpet and interior work.
Also the carb has had the choke removed and milled off so it takes a couple tries to fire up when its real cold out. Fires right up when warm. Might need some other misc odds and ends but its a great cruiser shop truck. Would be a perfect LS swap project.

$4999 OR BEST OFFER! Make a reasonable offer! Open to trades
PM or email or text...
574-876-2548

zrsnopro97

iTrader: (1)

couple more pics

zrsnopro97

iTrader: (1)

Bump for price drop. $4999 obo open to trades