F1A Procharger For Sale
Thread Starter
TECH Addict
iTrader: (28)
Joined: Feb 2006
Posts: 2,137
Likes: 1
From: Sugar Land, Tx
Ok, the time to make the switch has happened. I am going turbo so I am selling my F1A Procharger. This setup has approximately 300miles on it. It is an 8 rib setup with a 4.25 pulley. It made 12 psi on my 408. Included is inlet hat with filter, bracket with manual tensioner and spacers. You will need to stud the alternator but otherwise this is ready to bolt on. It works great just tired of the noise associated with the F1A and ready to make my car a sleeper with turbos. I am asking $3300 local pickup. Any questions pm, thanks, Josh


Last edited by Cam72aro; Apr 23, 2012 at 10:40 PM.
Thread Starter
TECH Addict
iTrader: (28)
Joined: Feb 2006
Posts: 2,137
Likes: 1
From: Sugar Land, Tx
I guestimated on 12psi around 725 or so to the wheels. I had 80lb injectors on it. I also had twin walbro 255's with a -10 feed line, fast rails, and aeromotive 1:1 regulator.
Thread Starter
TECH Addict
iTrader: (28)
Joined: Feb 2006
Posts: 2,137
Likes: 1
From: Sugar Land, Tx
It goes down low on drivers side in front of alternator on f body. It's also reverse rotation, the inlet faces the front. I doubt it will fit a vette depending what it is.
Trending Topics
Thread Starter
TECH Addict
iTrader: (28)
Joined: Feb 2006
Posts: 2,137
Likes: 1
From: Sugar Land, Tx
I get bored quickly, lol. The turbo setup is either going to be twin 6665's or s t88 turbonetics. I see you got the 4" mufflex setup. You like it?
Thread Starter
TECH Addict
iTrader: (28)
Joined: Feb 2006
Posts: 2,137
Likes: 1
From: Sugar Land, Tx


