Category: Accessories
Price: $2000
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): AZ
Item Condition: Brand New
Engine: LS1/LS6
LS Engine?: Fits LS Engine

^--RPM stage V trans I received from kevin@vengeance racing in august. 2300 miles, still wrapped up from receiving it from him 2000$


^-- trans cooler 40$


^--ls1 f body radiator (m6). approx 70k miles, w hoses shown. will separate. 100$


^-- 5.0 ford radiator, fits early mustangs (and i assume falcons, etc) 150$


sold
^-- ls1 f body oil pan/baffle/pick up. approx 70k. 200$


^--early ford (mustang spindle) Wilwood 4 piston brake setup, 12.1" all around, includes parking brake, floor mounted e brake (w lines), ss lines, wire to tie rotors together, even a lokar billet/leather e-brake boot. (more pics, part numbers, etc avail upon req) 2500$

sold
^-- ls1 valve covers 45?$



^-- late model (non egr) truck manifolds 50$


http://s93.photobucket.com/albums/l4...G_6807_011.jpg
^ a number of below parts on their only 'dry fit' install before coming off for sale





^-- trickflow street burner 5.0 intake (upper and lower plenum, hardware, gaskets), lokar spacer/cable bracket, 85mm BBK throttle body, sn95 throttle body 600$



^-- B&M shifter 50$ http://bmracing.com/?wpsc-product=quicksilver



^-- Hooker longtubes, ceramic coated, early mustang (/falcon, etc). installed and never ran, some scratches. same port spacing as ls engines, so perfect for a flange swap. 600$


^--early mustang triangulated strut tower brace 100$


^--ls/t56 fbody transmission mount 60k 40$



^--lt1 corvette rotors/pads 200$


^-- fox body fan shroud/mechanical fan 100$




^-- accel 8.8mm wires, uncut 80$ http://prestoliteperformance.com/8-8...-fit-6983.html


^-- plug wire looms (missing a couple segments)15$


^-- lt1 fuel rail covers 100$

sold
^-- camaro amber corners w blackouts 40$



^-- camaro electric mirror housing (plug and play after adding mirror, painting if necessary) 40$


^-- ford 5.0 valve covers, polished/chrome. dirty but ready for a spit shine 40$



^-- tbi/tpi/vortec gasket set. part number above for your cross reference 20$


band clamps sold
^-- exhaust clamps, 3", 2 of each type 10$/ pair


^-- 97-04 f-150 lower grill, plastic but looks billet. probably fits other vehicles 40$


^-- monsoon components, 2x rear hatch tweeters/drivers, 1x rear seat driver, monsoon amp 60$ for all of it


^-- 10" type r sub. a few model years old, amp fell off the rack and the sub wore a hole in the cone. doesnt go all the way through, perfect for a repair job. 60$

40$
^-- probably not worth shipping, but early mustang door sills and rear valance

Feel free to pm, email, call or text. if you call and dont leave a message i wont return it.

Sean
s@stansy.com
48oh 2one7 88one3

 

PMs replied to

 

pms replied to again

 

oil pan pending

pms replied

saturbump

 

oil pan sold

pms replied

 

main post updated

 

bump so more people can buy stuff from me and be happy

 

if you were closer, that trans is tempting

 

believe it or not shipping isnt too bad; i just take it to pakmail, they pallet it and send it off. its surprisingly cheap.

 

it's not the cost i'm worried about, it's the possible damage in transit and insurance cost.

 

Another weekend bump!

@gillbot: it was palleted to me from vengeance wrapped up nice and pretty, i dont see why it wouldnt get to OH or anywhere else as damage free as it got here

who needs a nice new transmission this summer?

 

how much to 44413?

 

Fully insured, palleted, wrapped and delivered with a smilie face for 565

id call it 2500 shipped

 

I'll have to pass, I can drive to RPM since they are only about 6 hours from me.

 

like you wanna drive all that way!

bump for the interest and PMs replied

 

had a lot of questions regarding the shifter so i updated the main post again. more pms replied.

 

Pms replied, updated the main post w more info on products ive had questions about

 

another bump, more pms

 

trade your 60e for th400 rmvb with a brake?

 

This trans was for a more aggressive build for a different car, and now the project is a street going 6 speed, so id have to guess a th400 wouldnt be worth it, but if you wanna pm me the info ill see if its more worth it to ship this to you and sell that locally